Call 07942533809 84% Response Rate

Send Email

Band Saw Machine

Leading Manufacturer of mmt-300 tca metal band saw machine, 700 x 525 tcsa semi automatic band saw machine, 400 tcsa semi automatic band saw machine, mmt 210 tca bandsaw metal machine, mmt450 tca band saw machine and mmt-110 manual vertical band saw machine from Dewas.
MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine
  • MMT-300 TCA Metal  Band Saw Machine

MMT-300 TCA Metal Band Saw Machine

Product Price: Rs 9.5 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Machine TypeFully Automatic
Usage/ApplicationIndustrial
MaterialMild Steel
Model Name/NumberMMT-300 TCA
BrandMalwa Machine Tools
Power440 V +- 10 % 50 Hz,3 Phase A.C. IP 54
Cutting Speed20 mtr./min
Cutting CapacitySquare - 300x300mm & Round - 300mm
Clamping Capacity300mm
Cutting Accuracy & Cut Face100mm +- 0.1mm
Hardness to be cut70 BHN
Maximum weight can be placed on the machine1.5 Tons
Bi-Metallic Band Saw Blade4100x34x1.1mm
Floor area for machine2200x2200mm
Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:

  • Fully casted (C.I. Graded) cutting arm.
  • Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
  • Automatic height adjustment for saw frame to save cycle time.
  • Tungsten carbide face guides with ball bearings.
  • Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
  • Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
  • Automation through PLC with multiple Indexing.
  • Piece counter with Display.
  • Shuttle table indexing on two horizontal hardened, ground columns & hard chrome plated.
  • Multiple Indexing.
  • Tachometer use for running at the proper band speed is essential for optimum blade life.
  • Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses.
  • Safety Control System.
  • Hydraulic band tension with pressure gauge.
  • Hydraulic Main vice & Shuttle vice with Double Acting Hydraulic Cylinder.
  • Siko meter and lead screw for perfect length setting.
  • Double Cylinders in Up down Motion for smooth running.
  • Chips removing wire brush for band cleaning.
  • Rear table for cut piece resting.
  • Coolant System.
  • Strainer system used for coolant filtration.
  • Power pack and necessary component.
  • In built control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
  • Saw motor - 5H.P.
  • Hydraulic motor - 1.5H.P.
  • Coolant Motor - 0.16H.P.
Get Best QuoteRequest A Callback
700 x 525 TCSA Semi Automatic Band Saw Machine
  • 700 x 525 TCSA Semi Automatic Band Saw Machine
  • 700 x 525 TCSA Semi Automatic Band Saw Machine
  • 700 x 525 TCSA Semi Automatic Band Saw Machine

700 x 525 TCSA Semi Automatic Band Saw Machine

Product Price: Rs 12.76 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Machine TypeSemi Automatic
BrandMalwa Machine Tools
Size/Dimension700X525 MM
Model Name/Number700 x 525 TCSA
Cutting Speed70 mtr./min
Usage/ApplicationMetal Cutting
MaterialMild Steel
Cutting Capacity20 to 100 mtr/min in steps std. Supply suitable for cutting all
Clamping Capacity700mm
Cutting Accuracy & Cut Face100mm +- 0.1mm.
Hardness to be cut300 BHN
Maximum weight can be placed on the machine2Tons
Bi-Metallic Band Saw Blade6100x41x1.3mm
Floor area for machine3660x1650mm
Power Supply440 V +- 10 % 50 Hz,3 Phase A.C. IP 54

Get Best QuoteRequest A Callback
400 TCSA Semi Automatic Band Saw Machine

400 TCSA Semi Automatic Band Saw Machine

Product Price: Rs 9.5 Lakh / UnitGet Best Price

Product Brochure

Product Details:
MaterialMild Steel
BrandMalwa Machine Tools
Model Name/Number400 TCSA
Cutting CapacitySquare - 400x400mm & Round 400mm.
Clamping Capacity400mm
Cutting Accuracy & Cut Face100mm + 0.1mm.
Cutting Speed100 mtr./min
Hardness to be cut250 BHN.
Maximum weight can be placed on the Machine1.2 Tons.
Bi- Metallic Band Saw Blade4860x41x1.3mm
Power Supply440 V +- 10 % 50 Hz,3 Phase A.C. IP 54
Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:
  • Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
  • Automatic height adjustment for saw frame to save cycle time.
  • Tungsten carbide face guides with ball bearings.
  • Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
  • Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
  • Cutting feed synchronizes to Band speed. If you reduce band speed automatically cutting feed will reduce (Optional).
  • Tachometer use for running at the proper band speed is essential for optimum blade life.
  • Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses.
  • Safety Control System.
  • Hydraulic band tension with pressure gauge.
  • Hydraulic Main vice with Double Acting Hydraulic Cylinder.
  • Chips removing wire brush for band cleaning.
  • Coolant Systems.
  • Strainer system used for coolant filtration.
  • Power pack and necessary component.
  • In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
  • Saw motor  7.5H.P.
  • Hydraulic motor  1.5H.P.
  • Coolant Motor  0.16H.P.
Get Best QuoteRequest A Callback
MMT 210 TCA Bandsaw Metal Machine
  • MMT 210 TCA Bandsaw Metal Machine
  • MMT 210 TCA Bandsaw Metal Machine

MMT 210 TCA Bandsaw Metal Machine

Product Price: Rs 7.25 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Size/Dimension210mm
Model Name/NumberMMT 210 TCA
Usage/ApplicationMetal Cutting
MaterialMild Steel
Automation GradeFully Automatic
Voltage440 V
Power4 Hp
Surface TreatmentColor Coated
Cutting Speed120 mtr./min
PhaseSingle Phase
BrandMalwa Machine Tools Private Limited
Country of OriginMade in India
MMT-210 TCA RF
Get Best QuoteRequest A Callback
MMT450 TCA Band Saw Machine

MMT450 TCA Band Saw Machine

Product Price: Rs 13.5 Lakh / PieceGet Best Price

Product Brochure

Product Details:
Model Name/NumberMMT450 TCA
BrandMalwa Machine Tools
Cutting Speed100 mtr./min
Cutting CapacitySquare - 700x700mm,Flat - 800x700mm & Round - 700mm
Clamping Capacity700mm
Cutting Accuracy & Cut Face100mm +- 0.1mm.
Hardness to be cut350 BHN
Maximum weight can be placed on the machine4.5Tons
Bi-Metallic Band Saw Blade8000x67x1.6mm
Floor area for machine4575x1830mm
Power Supply440 V +- 10 % 50 Hz,3 Phase A.C. IP 54
Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:
  • Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
  • Automatic height adjustment for saw frame to save cycle time.
  • Tungsten carbide face guides with ball bearings.
  • Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
  • Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
  • Tachometer use for running at the proper band speed is essential for optimum blade life.
  • Band speed adjusts by variable frequency drive.
  • Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses.
  • Safety Control System.
  • Hydraulic band tension with pressure gauge.
  • Hydraulic Main vice with Double Acting Hydraulic Cylinder.
  • Double Cylinders in Up down Motion for smooth running.
  • Length setting mechanical stopper.
  • Chips removing wire brush for band cleaning.
  • Electrically driven Swarf Conveyor with container for chips collection.
  • In buil t front roller table for job resting & smooth feeding.
  • In built rear roller table for cut piece resting.
  • Coolant System.
  • Strainer system used for coolant filtration.
  • Power pack and necessary component.
  • In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
  • Saw motor - 15H.P.
  • Hydraulic motor - 2H.P
  • Coolant Motor - 0.50H.P.

Get Best QuoteRequest A Callback
MMT-110 Manual Vertical Band Saw Machine

MMT-110 Manual Vertical Band Saw Machine

Product Price: Rs 5.25 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Cutting Speed60 mtr/min
Model Name/NumberMMT-110
Machine TypeFully Automatic
Country of OriginMade in India
BrandMalwa Machine Tools
Usage/ApplicationIndustrial
Blade Size3505 x 0.9 mm
MaterialMild Steel
Coolant Pump0.16 Hp
Throat In MM150 MM
Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:

Our MMT-110 Manual Vertical Band Saw Machine ensures that you get through the toughest cutting jobs, by offering convenience of operation along with an ergonomic design. This machine is also low maintenance, is durable, and is of use in diverse industry conditions. Our machine is able to clamp in no time, due to its with double lead screw adjustment. Our Manual Vertical Band Saw Machine is equipped with saws have an spectacular speed range, give precise cuts and process a wide variety of materials. Furthermore, the speed of the band saw blade is adjustable according to your requirements. Furthermore, the materials that can be cut range from hardened steel, aluminum, mild steel, non ferrous materials, solid plastic, stainless steel, to any super alloy.

Features of Manual Vertical Band Saw Machine:
  • Bow descending rate is controlled by a precision valve that is adjustable.
  • Equipped with a quick action lever
  • Great clamping vise with a closed hand wheel.Great hand grip
  • Heavy build
  • Includes vise pressure reduction
  • Larger cutting capacity
  • Laser line alignment
  • Mist spray applicator
  • Saws can be switched to pull down
  • The bow is manually lifted
  • Trigger switch available for starting the blade
Get Best QuoteRequest A Callback
MMT-850 TCSA Horizontal Band Saw Machine

MMT-850 TCSA Horizontal Band Saw Machine

Product Price: Rs 17.85 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Machine TypeHorizontal
MaterialMild Steel
Model Name/NumberMMT-850 TCSA
BrandMalwa Machine Tools
Blade Size8800 x 67 x 1.6 mm
Cutting Speed100 mtr/min
Cutting CapacityRound 850 mm . (Max) Square 850 x 850 mm. Flate 850 x 900 mm
Machine Weight7.2 Tons
Coolant Capacity200 Liters
Power Supply"440 V +- 10 % 50 Hz, 3 Phase A.C. SupplyControl Circuit with 220 V
Accuracy & Cut Phase100 mm O + 0.1 mm
Metal Cutting bandsaw Machine
Get Best QuoteRequest A Callback
525 TCSA Semi Automatic Band Saw Machine
  • 525 TCSA Semi Automatic Band Saw Machine
  • 525 TCSA Semi Automatic Band Saw Machine
  • 525 TCSA Semi Automatic Band Saw Machine

525 TCSA Semi Automatic Band Saw Machine

Product Price: Rs 10.75 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Machine TypeHorizontal
Usage/ApplicationIndustrial
Cutting Speed100 mtr./min
Power440 V +- 10 % 50 Hz,3 Phase A.C. IP 54.
Model Name/Number525 TCSA
Cutting CapacitySquare - 500x500mm,Flat - 550x500mm & Round - 525mm
Clamping Capacity525mm
Cutting Accuracy & Cut Face100mm +- 0.1mm
Hardness to be cut300 BHN
Maximum weight can be placed on the machine2Tons
Bi-Metallic Band Saw Blade5800x41x1.3mm
Floor area for machine3660x1650mm
Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:
  • Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
  • Automatic height adjustment for saw frame to save cycle time.
  • Tungsten carbide face guides with ball bearings.
  • Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
  • Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
  • Tachometer use for running at the proper band speed is essential for optimum blade life.
  • Hydraulic Blade tension and tension releases,
  • No sooner machine is off to minimize fatigue stresses.
  • Safety Control System.
  • Hydraulic band tension with pressure gauge.
  • Hydraulic Main vice with Double Acting Hydraulic Cylinder.
  • Double Cylinders in Up down Motion for smooth running.
  • Chips removing wire brush for band cleaning.
  • In built front roller table for job resting & smooth feeding.
  • In built rear roller table for cut piece resting.
  • Coolant System.
  • Strainer system used for coolant filtration.
  • Power pack and necessary component.
  • In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on automatic band saw machine.
  • Saw motor - 7.5/10H.P.
  • Hydraulic motor - 1.5H.P.
  • Coolant Motor - 0.16H.P.
Get Best QuoteRequest A Callback
MMT-210 TCSA Semi Automatic Band Saw Machine

MMT-210 TCSA Semi Automatic Band Saw Machine

Product Price: Rs 6.5 Lakh / UnitGet Best Price

Product Brochure

Product Details:
MaterialMild Steel
BrandMalwa Machine Tools
Cutting Speed100 mtr./min
Model Name/NumberMMT-210 TCSA
Cutting CapacitySquare - 210x210mm & Round 210mm
Clamping Capacity210mm
Cutting Accuracy & Cut Face100mm + 0.1mm.
Hardness to be cut350 BHN
Bi-Metallic Band Saw Blade3660x34x1.1mm
Floor area for machine1900x1900mm
Saw motor3H.P
We are a leading supplier of Band Saw Machines.We offer our customers with variety of designs and specifications.

Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:
  • Hydraulic motor - 1.5H.P.
  • Coolant Motor - 0.16H.P.
  • Supply - 440 V + 10 % 50 Hz, 3 Phase A.C. IP 54.
  • 0.7 Tons is the utmost weight that can be put on our machine
  • Completely forged (C.I. Class) trimming arm
  • Endlessly changeable pressure regulated cutting food as well as upward return quick motion through hydraulic cylinder
  • Programmed height modification for saw structure to conserve process time
  • Face guides of tungsten carbide is provided with ball bearings
  • Movable and adjustable hefty duty blade guide
  • Isolate Bearing housing is integrated to assimilate the axle weight because of hydraulic pressuring
  • Automation by PLC with different Indexing
  • Piece counter Display
  • Carry table ordering on double horizontal solidified, hard chrome plated and ground columns
  • Different Indexing
  • Hydraulic blade pressure and tension discharges, no sooner our machine is turned off to reduce fatigue pressures
  • Protection regulation System
  • Hydraulic shuttle vice and main vice is incorporated with two acting hydraulic cylinder
  • Lead screw and siko meter for impeccable length configuration
  • Hydraulic band pressure with force gauge
  • Chips evacuating wire brush to clean the band
  • Rare table for trimmed piece to rest
  • Integrated with coolant system
  • Strainer system utilized for coolant filtration
  • Energy pack and important parts are provided
  • Incorporated regulation panel with all essential switch gears, push buttons and fuses indicators are attached on our machine

Various Models Available :
  • 300 TCA Automatic Band Saw Machine
  • 350 TCA Automatic Band Saw Machine
  • 400 TCA Automatic Band Saw Machine
  • 450 TCA Automatic Band Saw Machine
  • 525 TCA Automatic Band Saw Machine
Get Best QuoteRequest A Callback
MMT 1800 TCSA Semi Automatic Metal Cutting Bandsaw Machine

MMT 1800 TCSA Semi Automatic Metal Cutting Bandsaw Machine

Product Price: Rs 30.51 Lakh / UnitGet Best Price

Product Brochure

Product Details:
BrandMalwa Machine Tools
MaterialSteel
Model Name/Number1800 TCSA
Cutting CapacitySquare - 1250x1250mm,Flat - 1300x1250mm & Round - 1250mm
Clamping Capacity1250mm
Cutting Accuracy & Cut Face100mm +- 0.1mm
Hardness to be cut70 BHN
Maximum weight can be placed on the machine13Tons
Bi-Metallic Band Saw Blade13100x67x1.6mm
Floor area for machine6710x2440mm
Power440 V +- 10 % 50 Hz,3 Phase A.C. IP 54.
We are providing metal cutting band saw machine at reasonable price.

Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:

  • Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
  • Automatic height adjustment for saw frame to save cycle time.
  • Tungsten carbide face guides with ball bearings.
  • Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
  • Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
  • Cutting feed synchronizes to Band speed. If you reduce band speed automatically cutting feed will reduce.(Optional)
  • Tachometer use for running at the proper band speed is essential for optimum blade life.
  • Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses.
  • Safety System.
  • Hydraulic band tension with pressure gauge.
  • Hydraulic Main vice with Double Acting Hydraulic Cylinder.
  • Double Cylinders in Up down Motion for smooth running.
  • Chips removing wire brush for band cleaning.
  • Electrically driven Swarf Conveyor with container for chips collection.
  • In built rear roller table for cut piece resting.
  • Coolant System.
  • Strainer system used for coolant filtration.
  • Power pack and necessary component.
  • In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
  • Saw motor - 20H.P.
  • Hydraulic motor - 3H.P.
  • Coolant Motor - 0.50H.P.
Get Best QuoteRequest A Callback
350 TCA Automatic Band Saw Machine
  • 350 TCA Automatic Band Saw Machine
  • 350 TCA Automatic Band Saw Machine

350 TCA Automatic Band Saw Machine

Product Price: Rs 12.5 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Machine TypeFully Automatic
Usage/ApplicationIndustrial & workshop
MaterialMild Steel
I Deal InNew Only
BrandMalwa Machine Tools
Cutting Speed100 mtr./min
Model Name/Number350 TCA
Cutting CapacitySquare - 350x350mm,Flat 400x350mm & Round 350mm
Clamping Capacity350mm
Cutting Accuracy & Cut Face100mm +- 0.1mm
Hardness to be cut90 BHN.
Power Supply440 V +- 10 % 50 Hz,3 Phase A.C. IP 54.
Maximum weight can be placed on the machine2.2 Tons.
Bi-Metallic Band Saw Blade5100x41x1.3mm.
Floor area for machine2800x2800mm.
We are a leading supplier of Band Saw Machines.

Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:
  • Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
  • Automatic height adjustment for saw frame to save cycle time.
  • Tungsten carbide face guides with ball bearings.
  • Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
  • Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
  • Automation through PLC with multiple Indexing.
  • Piece counter with Display.
  • Shuttle table indexing on two horizontal hardened, ground columns & hard chrome plated.
  • Tachometer use for running at the proper band speed is essential for optimum blade life.
  • Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses
  • Safety System.
  • Hydraulic band tension with pressure gauge.
  • Hydraulic Main vice & Shuttle vice with Double Acting Hydraulic Cylinder.
  • Hydraulic operated feeding shuttle for precise length feeding up to 400mm.
  • Siko meter and lead screw for perfect length setting.
  • Double Cylinders in Up down Motion for smooth running.
  • Chips removing wire brush for band cleaning.
  • Rear table for cut piece resting.
  • Coolant System.
  • Strainer system used for coolant filtration.
  • Power pack and necessary component.
  • In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
  • Saw motor - 5H.P. / 7.5H.P.
  • Hydraulic motor - 1.5H.P.
  • Coolant Motor - 0.16H.P.
Get Best QuoteRequest A Callback
1000 TCSA Semi Automatic Band Saw Machine

1000 TCSA Semi Automatic Band Saw Machine

Product Price: Rs 22.5 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Size/Dimension1000
Machine TypeSemi Automatic
Usage/ApplicationBOTH
MaterialMild Steel
Cutting Speed100 mtr./min
BrandMalwa Machine Tools
Model Name/Number1000 TCSA
Cutting CapacitySquare - 1000x1000mm & Round - 1000mm
Clamping Capacity200mm
Cutting Accuracy & Cut Face100mm +- 0.1mm
Hardness to be cut300 BHN
Maximum weight can be placed on the machine8Tons
Bi-Metallic Band Saw Blade12300x67x1.6mm
Floor area for machine6100x2175mm
Power Supply440 V +- 10 % 50 Hz,3 Phase A.C. IP 54.
We are a leading supplier of Band Saw Machines.

Price Range:
525000.00 - 4011000.00 INR/Piece

Other Details:
  • Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.Automatic height adjustment for saw frame to save cycle time.
  • Tungsten carbide face guides with ball bearings.
  • Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
  • Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
  • Techometer use for running at the proper band speed is essential for optimum blade life
  • Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses.
  • Safety Control.
  • Hydraulic band tension with pressure gauge.
  • Hydraulic Main vice with Double Acting Hydraulic Cylinder.
  • Double Cylinders in Up down Motion for smooth running.
  • Length setting mechanical stopper.
  • Chips removing wire brush for band cleaning.
  • Electrically driven Swarf Conveyor with container for chips collection.
  • In built front roller table for job resting & smooth feeding.
  • In built rear roller table for cut piece resting.
  • Coolant System.
  • Strainer system used for coolant filtration.
  • Power pack and necessary component.
  • In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
  • Saw motor - 20H.P.
  • Hydraulic motor - 3H.P.
  • Coolant Motor - 0.50H.P.
Get Best QuoteRequest A Callback
1500 TCSA Semi Automatic Band Saw Machine

1500 TCSA Semi Automatic Band Saw Machine

Product Price: Rs 35.51 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Cutting Speed100 mtr./min
BrandMalwa Machine Tools
Model Name/Number1500 TCSA
Cutting CapacitySquare - 1500x1500mm,Flat - 1550x1500mm & Round - 1500mm
Clamping Capacity1500mm
Cutting Accuracy & Cut Face100mm +- 0.1mm
Hardness to be cut220 BHN
Maximum weight can be placed on the machine18Tons
Bi-Metallic Band Saw Blade16300x 80 x 1.6 mm
Floor area for machine7015x2440mm
Power Supply440 V +- 10 % 50 Hz,3 Phase A.C. IP 54
We are providing metal cutting band saw machine at reasonable price.

Price Range:
525000.00 - 4011000.00 INR/Piece

Other Details:
  • Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
  • Automatic height adjustment for saw frame to save cycle time.
  • Tungsten carbide face guides with ball bearings.
  • Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
  • Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
  • Tachometer use for running at the proper band speed is essential for optimum blade life.
  • Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses.
  • Safety Control.
  • Hydraulic band tension with pressure gauge.
  • Hydraulic Main vice with Double Acting Hydraulic Cylinder.
  • Double Cylinders in Up down Motion for smooth running.
  • Chips removing wire brush for band cleaning.
  • Electrically driven Swarf Conveyor with container for chips collection.
  • In built rear roller table for cut piece resting.
  • Coolant System.
  • Strainer system used for coolant filtration.
  • Power pack and necessary component.
  • In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
  • Saw motor - 20H.P.
  • Hydraulic motor - 3H.P.
  • Coolant Motor - 1 H.P. LHP Make
Get Best QuoteRequest A Callback
MMT-220  High Speed Vertical Bandsaw Machine

MMT-220 High Speed Vertical Bandsaw Machine

Product Price: Rs 10.82 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Usage/ApplicationIndustrial
MaterialMild Steel
BrandMalwa Machine Tools
Cutting Speed80 mtr./min
Model Name/NumberMMT-220
Automatic GradeAutomatic
Power440 V +- 10 % 50 Hz,3 Phase A.C. IP 54
Cutting Accuracy & Cut Face100mm + 0.1mm.
Price Range: 525000.00 - 4011000.00 INR/Piece

Other Details:
Our MMT-220 High Speed vertical band saw Machine offers advance features such as a coolant system for pumping and piping; and a bimetallic blade. It offers longer functional life and is low maintenance that ensures smooth work operation. It is easy to install, offers an ergonomic design, along with easy operation. Furthermore, our High Speed Vertical Band Saw Machine has a rigid construction, and is deemed suitable for a variety of heavy material cutting requirements as well as other production applications. It comes with a sturdy work table as well as a tough clamping vise. Additionally, the feed control is managed with the use of a pressure and temperature feed control valve.

Features of High Speed Vertical Band Saw Machine:
  • AC drive control with an adjustable heavy duty blade
  • High efficiency gear box; auto coolant flow; with an efficient motor
  • Chip brushing of blade
  • Less power consumption while providing proper lighting at workspace
  • Trouble free higher production.
  • Well-equipped electrical control panel and hydraulic power pack
  • Work table indexing
Get Best QuoteRequest A Callback
MMT 1500x2000 TCSA Band Saw Machine

MMT 1500x2000 TCSA Band Saw Machine

Product Price: Rs 35.51 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Size/Dimension1500x2000
Model Name/NumberMMT-1500x2000 TCSA
Machine TypeHorizontal
Usage/ApplicationIndustrial
MaterialMild Steel
Voltage440 V
Power4 Hp
BrandMalwa Machine Tools Private Limited
PhaseSingle Phase
Surface TreatmentColor Coated
Country of OriginMade in India
We are a leading supplier of Metal Cutting Bandsaw Machine.
Get Best QuoteRequest A Callback
MMT 1000x2500 TCSA Band Saw Machine

MMT 1000x2500 TCSA Band Saw Machine

Product Price: Rs 38.5 Lakh / UnitGet Best Price

Product Brochure

Product Details:
PhaseSingle Phase
Size/Dimension1000x2500mm
BrandMalwa Machine Tools Private Limited
Cutting Speed100 mtr./min
Country of OriginMade in India
Power4 Hp
Surface TreatmentColor Coated
Usage/ApplicationMetal Cutting
Voltage440 V
Machine TypeSemi Automatic
Model Name/NumberMMT-1000x2500 TCSA
MaterialMild Steel
Metal cutting bandsaw machine
Get Best QuoteRequest A Callback
MMT-1500 x1000 TCSA
  • MMT-1500 x1000 TCSA
  • MMT-1500 x1000 TCSA

MMT-1500 x1000 TCSA

Product Price: Rs 25.5 Lakh / PieceGet Best Price

Product Brochure

Product Details:
Model Name/NumberMMT-1500x1000 TCSA
Capacity1000x1500
Usage/ApplicationMetal Cutting
MaterialMild Steel
Automation GradeAutomatic
Voltage440 V +- 10 % 50 Hz,3 Phase A.C. IP 54
Power440 V +- 10 % 50 Hz,3 Phase A.C. IP 54
Blade Speed2280
Coolant Tank Capacity100 ltr
Coolant Pump0.50H.P.
Blade Size12600x67x1.6mm
Diameter1500x1000
Size/Dimension3500x1800
Metal Cutting Bandsaw machine 
Get Best QuoteRequest A Callback
1250 TCSA Semi Automatic Band Saw Machine

1250 TCSA Semi Automatic Band Saw Machine

Product Price: Rs 25.5 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Machine TypeHorizontal
BrandMalwa Machine Tools
Size/Dimension1250mm
Usage/ApplicationMetal Cutting
MaterialMild Steel
Cutting Speed80 mtr./min
Model Name/Number1250 TCSA
Country of OriginMade in India
Cutting CapacitySquare - 1250x1250mm,Flat - 1300x1250mm & Round - 1250mm
Clamping Capacity1250mm
Cutting Accuracy & Cut Face100mm +- 0.1mm
Hardness to be cut250 BHN
Maximum weight can be placed on the machine13Tons.
Bi-Metallic Band Saw Blade13100x67x1.6mm
Floor area for machine6710x2440mm
Power Supply440 V +- 10 % 50 Hz,3 Phase A.C. IP 54.
MMT-1250 TCSA 
Get Best QuoteRequest A Callback
Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Malwa Machine Tools India Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.